Active subscribers
—Waiting for Accel-PPPConnectingOP
YOUR NETWORK, AT A GLANCE
Network overview
Traffic, subscribers, and the signals that need your attention.
Waiting for first snapshot
Uplink receive
—Uplink not configuredUplink transmit
—Measured at the uplink interfaceCPU utilization
—Waiting for a second sampleUplink traffic
Measured traffic · recent history
ReceiveTransmit
Collecting traffic samples…
Router health
—
Available memory —
—Conntrack utilization —
—Access services
Accel-PPP instances and RADIUS state
Attention needed
Current conditions from live samples
Subscriber sessions
Search the latest collected session table.
| Subscriber | IP address | Access / interface | Type | Uptime | Assigned rate |
|---|
—
Session details
Physical interfaces
Hardware-backed ports only, including ports with no cable or link.
| Port / MAC | Admin / Link | Speed | MTU | Bundle | IPv4 | RX / TX |
|---|
VLAN interfaces
Existing VLANs from the kernel. Pending changes are listed separately below.
| Interface | Parent / tag | Admin / Link | MTU | IPv4 | PPP sessions | Actions |
|---|
VLAN changes are drafts, not live operations. PPP selection records the intended service only; it does not start an instance or accept users yet. Live apply, reboot persistence and rollback are not connected.
Pending VLAN plans
Loading saved plans…
| Name / Parent | Tag / MTU | Desired service | Planned change | Actions |
|---|
Port Bundle
Existing bonding interfaces, member ports and actual bonding mode. —
| Bundle | Mode / Hash policy | Members | Admin / Link | MTU | RX / TX |
|---|
Bundle creation is draft-only. Saving does not move physical ports or create a live bond. Live apply and switch-side LACP configuration are separate.
Pending bundle plans
Loading saved plans…
| Bundle | Members | Mode / MTU | Desired state | Actions |
|---|
Interface List
Bundle → member ports / VLANs → PPP sessions. Physical ports outside bundles are separate roots.
PPP interfaces and users are loaded under their observed access interface, 25 at a time. Unmapped sessions remain in a separate group; parent relationships are never guessed from a name.
Kernel IPv4 routes
Main routing table snapshot. Other tables and routing protocol status are not collected in this release.
| Destination | Mask | Gateway | Interface | Metric |
|---|
CPU cores
Per-core usage exposes busy forwarding cores hidden by an aggregate average.
Packet processing
Host details
Configuration saves are drafts. Test authentication sends a real RADIUS request. Saving does not change live CoA, QoS or PPP address allocation; Apply remains unavailable.
RADIUS servers
Saved servers for diagnostics. Changes do not reconfigure live PPP or CoA.
| Name / Address | Protocol | Auth / Accounting | Timeout | Status | Actions |
|---|
Not loaded
One shared incoming listener port. Saving does not open a listener or firewall port.
Not loaded
Test authentication & attributes
Uses an enabled, saved RADIUS server. Authentication-only or a 20-second accounting diagnostic. Neither creates PPP or Internet traffic.
Live RADIUS status
No snapshot
Live collector data is separate from saved drafts. UDP has no persistent connection; reported active state is not a verified reachability test. Unavailable counters are not zero.
Service profiles
Define remote IPv4 prefixes. Rates arrive per subscriber from RADIUS.
Loading draft…
Framed Pool
Local PPP IPv4 address pools. Match the exact RADIUS pool name.
Not loaded